Connector kits and pigtails
FC, FC/APC, SC, SC/APC, LC, LC/APC, MPO and MPX connector parts, and connectorized buffered-fiber pigtails
Split sleeve, 2.5mm zirconia
Split sleeve, 2.5mm I.D., single mode SC or FC coupler/adaptor type, zirconia, 11.4mmm long, straight cut
connector, ST, single mode
ST connector, pre-assembled, with zirconia sleeve for single mode fiber
ST, stainless body
ST 125um fiber connector with zirconia ferrule, stainless steel body, 3mm boot
Split sleeve, 2.5mm phosphor-bronze
Multimode FC or SC coupler/adapter type split sleeve, 2.5mm I.D. 11.4mmm long, phosphor-bronze, straight cut
Biconic connector pigtail, jacketed, 62.5/125, 3m
Biconic optical connector with jacketed 62.5/125 multimode fiber pigtail, 3m long
LC/APC, epoxy, 3mm
LC/APC single mode fiber connector kit, epoxy-type, angled face 125um zirconia ferrule, 3mm green boot
LC duplex connector, epoxy, 3mm
LC duplex multimode fiber connector kit for 125um nominal cladding dia. fiber with zirconia ferrules, white and black boots for 3mm cable, duplexing clip
SC/APC connector kit, 3mm
SC/APC single mode fiber connector kit, epoxy type, 125um angled face zirconia ferrule, with strain relief boot for 3mm cable
FC connector, 230um, zirconia
FC connector kit for 230um fiber, epoxy-type with zirconia ferrule, 3mm boot
ST UNICAM 62.5/125 connector kit, No-Epoxy
ST 62.5/125 multimode fiber connector kit with composite ferrule, No-Epoxy installation with UNICAM tools
SC UNICAM 62.5/125 connector kit, No-Epoxy
SC 62.5/125 multimode fiber connector kit 95-000-41 with ceramic ferrule, No-Epoxy installation with UNICAM tools
LC pigtail, 100/140, 3mm jacketed, 0.5m
LC connector pigtail, 100/140um multimode fiber, 3mm jacketed, 0.5m long
LC, epoxy, 900um boot
LC single mode fiber connector, 125um zirconia ferule, 0.9mm boot
LC connector, 140um, zirconia
LC connector kit for 140um fiber, epoxy-type with zirconia ferrule, beige body, white 3mm boot
Multimode Mechanical Splice
Mechanical splice for permanent field-assembly of multimode fiber with 120 - 145 micron cladding and 250 - 900 micron buffer coating. Adhesive and accelerator not included.
ST connector, 230um, stainless
ST connector, epoxy-type, with stainless steel ferrule for 230 micron fiber, 0.9mm and 3mm boots
MTRJ male connector kit
MTRJ duplex fiber connector kit for 125um multimode fiber with 1.8mm boot, includes alignment pins
ST, epoxy type, with 900u boot
ST connector for epoxy termination of multimode fiber with 125 micron nominal cladding, complete with strain relief boot for 900 micron buffered fiber
E2000/APC pigtail, 900um, 4m
E2000/APC connector pigtail, 900um buffered single mode fiber, 4m long
MTRJ connector, male 50u, FIRSTLINK
MTRJ duplex fiber connector with pins (male), for 50 micron fiber, with LTX adapter and boot
SMA 905 connector kit, 600 um
SMA 905 multimode connector with stainless steel body and ferrule for 600 micron fiber, 3mm boot
ULTRASPLICE, mechanical, 125um
Mechanical splice for 125um fiber, aligns two bare fiber ends for temporary connection, reusable
SC, 140um, 3mm
SC connector, epoxy-type, zirconia ferrule for 100/140 fiber, ivory, 3mm boot
FC connector, 140um, zirconia
FC connector kit for 140um fiber, epoxy-type, with zirconia ferrule, 3mm boot
SMA-906 connector,1000um, stainless, 3mm
SMA-906 connector, epoxy-type, 1000um I.D. stainless steel ferrule, 3mm boot, with 906 to 906 coupler sleeve included
SC epoxy type, 0.9mm boot
SC single mode fiber connector kit, epoxy installation, 125 micron ID zirconia ferrule, 0.9mm boot for buffered fiber
LC connector, no-epoxy UNICAM, 50u
LC connector kit, 50um multimode, ceramic ferrule, UNICAM no-epoxy field-install
ST, 62.5/125, 900um, 2m
ST multimode connector pigtail, composite ferrule, composite body, 62.5/125 fiber, 900um buffered, 2m long
Diamond HMS-10/M, 62.5/125, 900um, 1m
Diamond HMS-10/M connector pigtail, 62.5/125 multimode fiber, 900um buffered, 1m long
FC/UPC pigtail, 250um bare fiber, 1.5m
FC connector pigtail, single mode, Ultra Polish for better Return Loss, 250um buffered bare fiber, 1.5m long
ST connector, 125um multimode, zirconia ferrule
ST connector kit, epoxy type, with zirconia ferrule, for 125 micron multimode fiber, 3mm strain-relief boot
LC connector, epoxy, 3mm
LC single mode fiber connector kit for 125um clad fiber, epoxy type, with zirconia sleeve, white boot for 3mm cable
LC zirconia split sleeve
LC-type split sleeve, 1.25mm I.D. x 6.8mm, zirconia, straight cut
ST, 900um, 2m
ST single mode connector pigtail, zirconia ferrule, composite body, 900um buffered, 2m long
LC phosphor-bronze split sleeve
LC-type split sleeve, 1.25mm I.D. x 6.8mm, phosphor-bronze, straight cut
SC duplex, epoxy type, beige, 3mm
SC duplex connector kit with zirconia ferrules for 125 micron (nom. cladding dia.) multimodefiber, beige body, 3mm boots
SC, multimode GIC, UV-cure, beige
SC multimode fiber connector, UV-cured epoxy type with glass ferrule,beige body, 900um and 3mm boots, 95-100-06R
FC connector, 900um boot
FC epoxy type single mode 125um fiber connector with zirconia ferrule, 900um boot
SC, epoxy-type, beige,900um
SC connector, epoxy type, with zirconia ferrule for 125um clad multimode fiber, with 900um boot
MTRJ male 62.5/125 fiber pigtail, 1m
MTRJ male duplex connector pigtail, 62.5/125 micron multimode fiber, 1.6mm jacketed, 1m long.NOTE: alignment pins may be removed if MTRJ female is required.
Ferrule, 2.5mm zirconia
2.5mm (FC type) zirconia 126um I.D. ferrule with metal flange
LC connector, epoxy, 3mm
LC multimode fiber connector kit for 125um nominal dia. cladding fiber, with zirconia ferrule, white boot for 3mm cable
SC, no-epoxy 62.5/125
SC LIGHTCRIMP PLUS no-epoxy connector for 62.5/125 multimode fiber, field-installable with AMP-NetConnect tool 492782-1 (complete tool kit 1278022-1)
LC ferrule, multimode, with flange
LC type 1.25mm OD zirconia ferrule, 127um ID, with metal flange
ST/APC connector, 125um, 3mm
ST/APC single mode fiber connector kit, epoxy type, with 125um I.D., 8deg. angled face zirconiaferrule, green boot for 3mm cable
SMA-905 pigtail, 400/430 fiber, 3mm jacketed, 1m
SMA-905 connector with 400/430 multimode fiber pigtail, 3mm jacketed, 1m long
ST, 230um, zirconia
ST connector kit for 230um fiber, zirconia ferrule with chamfered tip, 3mm boot
D4 pigtail, 900um buffered, 2m
D4 connector pigtail, 900um buffered single mode fiber, various colors, 2m long
FC/APC connector, 2mm key
FC/APC fiber connector kit, epoxy type, 125um angled face zirconia ferrule, narrow (2mm) key, with strain relief boot for 3mm cable
ST connector kit, SM, 3mm boot
ST single mode fiber connector, epoxy type, with strain relief boot for 3mm cable
SMA-906 connector kit, 125um
SMA-906 (SMA II) connector kit with stainless steel ferrule for 125um fiber, 905 adapter sleeve, 3mm boot.
SC, epoxy type, ivory, 3mm
SC fiber connector with zirconia ferrule for 125um multimode fiber, ivory body, 3mm boot
SC, epoxy-type, white, 3mm
SC single mode fiber connector with zirconia ferrule for 125um fiber, white body, 3mm boot
ESCON connector
ESCON (IBM compatible) duplex fiber connector kit with 128um I.D. zirconia ferrules, 5mm boot
LC, 900 um, 1m
LC connector with 900 micron buffered single mode fiber pigtail, 1m long
SMA 905 connector kit, 128um, zirconia
SMA-905 fiber connector, 128um ID zirconia ferrule, 3mm boot
ST, 125u, stainless ferrule, no-Epoxy
ST connector kit for 125 micron multimode fiber, no-Epoxy installation with Suttle ATCC-UNV crimp tool, stainless steel ferrule, 3mm strain-relief boot
ST, 3mm jacketed, 1m
ST single mode fiber connector pigtail, 3mm jacketed, 1m long
SC, epoxy type, 0.9 and 3mm boots
SC multimode connector kit for 125um fiber, zirconia ferrule, 900um and 3mm boots.Also sold as ADC FASTERM FTC-SCM111.
BICONIC connector
BICONIC connector for 125um. nominal cladding dia. multimode fiber, with 3mm boot, dust cap.NOTE: legacy part, limited quantities available.
ST connector kit, 140u, zirconia
ST connector kit with zirconia ferrule for fiber with 100/140 micron core/cladding diameter, epoxy type, metal body, with 3mm boot
MTRJ female connector kit
MTRJ duplex fiber connector kit for 125um multimode fiber with 1.8mm boot, no alignment pins
pigtail, FC/UPC connector, single mode fiber, 900um buffered, 1m
Single mode FC/UPC connector pigtail, with 1 m of 900 micron buffered fiber
ST pigtail, 62.5/125, 900um, 2.5 m
ST metal body connector with zirconia ferrule, 62.5/125 multimode 900um buffered fiber pigtail, misc. colors, 2.5 m long
pigtail, SC connector, single mode, 900 um fiber, 1m long
Single mode SC connector pigtail, with 1 m of 900 micron buffered fiber
FC/APC connector, 230um, 3mm
FC/APC fiber connector kit, epoxy type, 230um I.D., 8deg. angled face zirconia ferrule, 2mm key, with green boot for 3mm cable
LC, single mode, with flange
LC type 1.25mm zirconia ferrule, 125um I.D., with metal flange
SC epoxy-type, blue, 3mm
SC connector kit, epoxy-type, with zirconia ferrule for 125 micron single mode fiber, blue body, strain-relief boot for 3mm cable
FC/APC pigtail, 3mm jacketed, 1m
FC/APC pigtail, single mode, 3mm jacketed, 1m long
pigtail, FC connector, single mode fiber, 900 um buffered, 1m
Single mode FC connector pigtail, with 1 m of 900 micron buffered fiber
SMA 906 connector for 100/140u fiber
SMA 906 fiber connector kit with 140 micron ferrule, 905-adapter sleeve, boot for 3mm jacketed cable
SMA-905, 140um stainless, 3mm
SMA-905 connector for 140um fiber, stainless ferrule and body, hex nut, 3mm boot
FC connector kit, single mode
FC connector kit, epoxy type, for 125um cladding dia. single mode fiber, with 126 micron ID zirconia ferrule, metal body, 3mm boot
Fibrlok II type 2529 splice
3M Fibrlok II Universal Optical Fiber Splice for 125um fiber with 250um or 900um buffer.
SMA 905 connector kit, stainless steel
SMA connector for 125 micron fiber, stainless steel ferrule, 3mm boot
ST connector kit, SM, 0.9mm boot
ST connector kit, epoxy type, for 125 cladding dia. single mode fiber, with 126um ID. zirconia ferrule, metal body, strain relief boot for 0.9mm buffered fiber
MTRJ female 50/125 fiber pigtail, 1m
MTRJ female (no pins) duplex connector pigtail, 50/125 multimode fiber, 1.6mm aqua jacketed, 3.5m long.
FC multimode connector kit, 3mm boot
FC multimode 126um fiber connector, epoxy type, metal body with pre-radiused ceramic ferrule, blue strain relief boot for 3mm cable
MTRJ male SM no-epoxy UNICAM
MTRJ male (with pins) single mode 92-201-97-P fiber connector with black boot, no-epoxy installation with UNICAM tools
ST/UPC, no-epoxy, UNICAM PRETIUM
ST single mode fiber connector kit, Corning UNICAM 95-200-52, with zirconia ferrule, 0.9mm and 3mm boots. No-epoxy installation with UNICAM PRETIUM tools.
CamSplice 250um, 900um, reusable
Mechanical splice for 350um or 900um buffered fiber, reusable, tunable, index-matching gel pre-inserted, no adhesive needed
FC UNICAM 62.5/125 connector kit, no-Epoxy
FC 62.5/125 multimode fiber connector kit 95-000-61 with ceramic ferrule, No-Epoxy installation with UNICAM tools
SC 230um, 3mm
SC connector kit for 230 fiber, epoxy-type, with zirconia ferrule and 3mm boot, ivory
E2000/PC 125um, 3mm
E2000/PC multimode connector kit for 125um fiber, zirconia ferrule, beige plastic body, 3mm boot
pigtail, single mode, LC/APC connector, 900 micron buffered fiber, 1m
LC/APC pigtail, single mode, with 1m of 900 micron buffered fiber
ST/APC pigtail, 3mm jacketed, 1m
ST/APC single mode fiber connector pigtail, 3mm jacketed, 1m long
ST connector, 140 micron, stainless
ST connector with stainless steel body and ferrule for 140 micron fiber, 3mm boot
MTRJ connector, female 50u, FIRSTLINK
MTRJ duplex fiber connector, female (no alignment pins), for 50 micron fiber, with LTX adapter and boot
pigtail, single mode, FC/APC, 900 micron buffered fiber, 1m
FC/APC pigtail, single mode, with 900 micron buffered fiber, 1m long
ST UNICAM no-epoxy SM
ST single mode fiber connector kit, Corning UNICAM 95-200-51, with zirconia ferrule, 0.9mm and 3mm boots. No-epoxy installation with UNICAM tools.
SC UNICAM single mode no-epoxy
SC single mode fiber connector kit, Corning UNICAM 95-200-41, with zirconia ferrule, 0.9mm and 3mm boots. No-epoxy installation with UNICAM tools.
pigtail, single mode, SC/APC, 900 micron buffered fiber, 1m
SC/APC pigtail, single mode, with 900 micron buffered fiber, 1m long
FC pigtail, 50/125, 250um, 1m
FC connector pigtail, 50/125 multimode, 250um buffered bare fiber, 1m long
FC/APC connector, 140um, 3mm
FC/APC fiber connector kit, epoxy type, 140um I.D., 8deg. angled face zirconia ferrule, 2mm key, with green boot for 3mm cable
ST/APC connector, 230um, 3mm
ST/APC single mode fiber connector kit, epoxy type, with 230um I.D., 8deg. angled face zirconia ferrule, green boot for 3mm cable
SC multimode connector kit, 3mm, beige, epoxy
SC connector kit with zirconia ferrule for 125 micron clad multimode fiber, 3mm boot, beige color
ST connector, 160 micron, stainless
ST connector with stainless steel body and ferrule for 160 micron fiber, 3mm boot
SC pigtail, 62.5/125, 900um buffered, 1m
SC connector pigtail, 62.5/125 multimode, 900um buffered fiber, 1m long
E2000/PC 140um beige 3mm
E2000/PC multimode connector kit for 140um fiber, zirconia ferrule, beige plastic body, 3mm boot
|
